What colors need to be mixed to get black. How to get colors: black, blue, red

Black and white are considered the actual absence of color. Therefore, to the question of how to get black, you can answer that it is only possible to get a color close to it by mixing several.

For an artist, this color means the darkest, and for scientists, it means the absence of color. Black is an achromatic shade that absorbs all light. In terms of absorption of light flux, it is opposite to white, which completely reflects the light and radiation incident on it. In the natural environment, there is a material close to it in tone - this is dark Vantablack carbon, which absorbs 99.96% of incident light and other radiation.

Even during the Renaissance, masters of painting tried to obtain black paint and concluded that it was impossible to do this from other paints. Therefore, they used burnt bones, from the soot of which they made a matte black paint.

Today, black paint is made industrially from natural carbon pigments such as graphite and carbon black.

In practice, 2 main color models are used:

RGB- additive, which is based on the superposition of rays reflected from the surfaces of objects. It is used in computer monitors and contains the main colors: R-red, G-green, B-blue. The remaining colors and shades are obtained by overlay.
CMYK- subtractive model, which is based on the physical mixing of pigments, with white being the absence of color, and pure black obtained by mixing cyan (C-cyan), magenta (M-magenta) and yellow (Yellow) tones, K (key color) - key. This system is used in the printing industry and printing on printers.

What colors should I mix?

To get a black color close to ideal, you can go by mixing paints of the following colors:

Red and green– the resulting tone will be close to the desired one (in fact, it turns out to be very dark, and if you look closely, it’s not quite ideal).
Blue, yellow and red– if you take these 3 primary colors, then mixing them will also allow you to get a fairly rich color.
D additional colors (brown, purple, blue)– you need to mix them in small quantities, then you will get an approximate color.

You can use any paints intended for painting or household purposes for mixing: acrylic, gouache, watercolor and oil. If there is no ready-made dye of a classic tone, then there are a lot of options on how to make black paint from others.

To obtain a pure color, you will have to work hard and select the necessary proportions, gradually adding different colors.

On the video: what colors to mix to get black.

There are many shades, slightly different from classic black, that will allow the artist to add originality to his work. Historically, the following shades have developed:

Slate - Essentially a dark grey, the name comes from the slate slate that was previously used in blackboards.
Karamazy – synonyms for “dark-haired”, “dark-skinned”.
Anthracite is a highly saturated color with some shine.
Ox's blood is a black and red color.
Bardadym is the name of the king of black suit in the game of cards.

Modern shades of black differ from those used previously:

Soft black - to obtain it you need to mix the following colors: turquoise, pink and yellow, sometimes add a little more white.
Medium - pink, ultramarine and light yellow paints are mixed for it.
Rich color It is possible to make not only from three primary colors (chromatic), but also using red, yellow and blue.
Blue-black - obtained by mixing brown and dark blue.

Many shades of dark and light gray can be made by experimenting with adding white paint or adding a little water at a time. Experience will show you what colors and shades you get.

Black and white are considered the actual absence of color. Therefore, to the question of how to get black, you can answer that it is only possible to get a color close to it by mixing several.

Today, black paint is made industrially from natural carbon pigments such as graphite and carbon black.

Color models

In practice, 2 main color models are used:

RGB- additive, which is based on the superposition of rays reflected from the surfaces of objects. It is used in computer monitors and contains the main colors: R-red, G-green, B-blue. The remaining colors and shades are obtained by overlay.
CMYK- subtractive model, which is based on the physical mixing of pigments, with white being the absence of color, and pure black obtained by mixing cyan (C-cyan), magenta (M-magenta) and yellow (Yellow) tones, K (key color) - key. This system is used in the printing industry and printing on printers.

What colors should I mix?

To get a black color close to ideal, you can go by mixing paints of the following colors:

Red and green - the resulting tone will be close to the desired one (in fact, it turns out to be very dark, and if you look closely, it is not quite ideal).
Blue, yellow and red - if you take these 3 primary colors, then mixing them will also allow you to get a fairly rich color scheme.
Additional colors (brown, purple, blue) - you need to mix them in small quantities, then you will get an approximate color.

To obtain a pure color, you will have to work hard and select the necessary proportions, gradually adding different colors.

On the video: what colors to mix to get black.

Shades of black

There are many shades, slightly different from classic black, that will allow the artist to add originality to his work. Historically, the following shades have developed:

Slate - Essentially a dark grey, the name comes from the slate slate that was previously used in blackboards.
Karamazy – synonyms for “dark-haired”, “dark-skinned”.
Anthracite is a highly saturated color with some shine.
Ox's blood is a black and red color.
Bardadym is the name of the king of black suit in the game of cards.

Modern shades of black differ from those used previously:

Soft black - to obtain it you need to mix the following colors: turquoise, pink and yellow, sometimes adding a little white.
Medium - pink, ultramarine and light yellow paints are mixed for it.
A rich color scheme can be made not only from three primary colors (chromatic), but also using red, yellow and blue.
Blue-black - obtained by mixing brown and dark blue.

Many shades of dark and light gray can be made by experimenting with adding white paint or adding a little water at a time. Experience will show you what colors and shades you get.

Mixing primary colors (1 video)

What colors should you mix to get black?

Black and white colors are also commonly called the absence of color as such. If you need to get black by mixing other colors, then this can be done by mixing three colors - magenta, yellow and cyan.

You can get black by mixing red and green A. However, in this case the color will not be 100% black.

If you need to get black from other paint colors, then you will need only three colors for this, namely:

There are also two more paints that, when mixed, will produce black: red and green. The only thing is that the color is not quite black, but very close to it.

If there are no paints with black color, and you need it right now, then black color can be obtained by mixing paints of other colors. In order to get black you need to mix colors such as blue, red and yellow. From these three popular paint colors we get the desired black color.

In order to get black color, one color, we need to have as many as three others in stock: these are cyan, yellow and magenta.

If you mix only blue and yellow, you get green
yellow + magenta gives us red
mix magenta and cyan to get blue
oh well we get black color, if you mix all these three colors.

If you mix red, blue and green in equal proportions, you will get a pure black color, but it will not be saturated.

If you need black color in paints for painting, then you can make it yourself. To do this, take activated carbon (in tablets) and dissolve it in vodka.

This is how you can get black paint for drawing.

If you are faced with the need to get black by mixing different shades of paint, then to get black you will need to mix three colors, which are:

1) Purple color;

3) And blue color.

And here's the mix:

To get black, you can mix all the colors you have except white, white will turn black into gray. You can also mix red and green, or you can also mix yellow, magenta and cyan.

Using additive color mixing (RGB model), black can only be obtained with zero intensity of all three components. This mixing of colors is a matter of taste. Using subtractive color mixing (CMYK model), black color, theoretically, is obtained by mixing components C, M, Y with maximum intensities. What you get in practice is very different from black, so in practice blacK is added to the colors Cyan, Magenta and Yellow - a rich black color.

what colors can be mixed. to get black?

Comments

if you don’t need it right now, you can buy black dye))

Blue, red and green in equal proportions - you get pure black color)))

There are 4 primary colors: yellow, red, blue and black. White separately. When they are mixed, additional colors (green, orange, purple, brown, etc.) and their shades are obtained. Therefore, you cannot get black color, no matter what paints you mix.

what nonsense. Blue, red and green in equal proportions. That's pure black.

Activated carbon + dilute with vodka. Take a look at the court http://forum.say7.info/topic48484.html

Raida, thank you very much. you saved me.

In the future, buy black paint without any problems.

Girls, I’ve already scoured the entire Internet, I can’t find the best way to mix several colors of soap base, so that I get multi-colored stains, how can I do this so that the base doesn’t have time to harden? Thank you all in advance for your answers.

Moms and not only, tell me how to get black, I need to make a layer of black, what to add or what to mix. Thank you

To my post. girls thank you very much. For the answers. There are a few buts! My son practically doesn’t eat complementary foods, just porridge. Vegetables are refused to be cut. I even try to give an apple for several days and my nose turns up. In short, today I offered a mixture. First, porridge.

Girls, I need help. I always knew very well that the color on the walls was different from the color on the palette, but only so much. At my daughter’s request, of course, I chose light pink paint, but in fact it turned out not light pink at all (((it was.

Everyone Good morning. Dear professionals, do not pass by. Help with advice. We ordered a cake with cream decoration. What cream will turn into an intense black color (I have americolor and chefmaster gels) and will hold its shape well? Everyone in advance.

Girls, help, I have a little idea. You need to buy a lot of bodysuits in regular black and white colors, without patterns, you need a lot, so the price is up to 500 rubles, but they must be of high quality. Please help me where to find black ones? Possibly online, but preferably Russia.

Dear girls, tell me how to get such a rich golden color of mastic? I paint with condurin on top - it doesn’t turn out that way at all ((Thanks to everyone in advance!

Sh I'm looking for a jacket like this, only in black. I will be glad to receive any offers with prices) Thank you all in advance!

Clever little fellows :) please tell me how to get it purple, such as satin ribbon (see photo). I need to paint the mastic, I plan to do the painting with an airbrush. Americolor royal violet dye gives blue when dyed, what is the reason why it is not purple.

What colors must be mixed to get black?

red+blue+green=black
easy gray and brown, mix for a long time until black or just mix dark colors for a very long time and you will get black

when mixing yellow, magenta and cyan dyes

5 proportions of red, 1-3 blue will be a little blue or a little red, then add a little yellow 0.5-1.

I had a case when I ran out of black paint in the watercolor “Leningrad”, so I finally learned how to get black by mixing two colors (I don’t remember the exact names): this is purple, and it seems dark green.

If we talk about mixing colors.
By mixing paints of the three primary colors of blue (cyan), yellow and purple (magenta) or any color of the first order with it additional color second order (spectral yellow + spectral violet for example). But this can only be done in the theory of subtractive synthesis with ideal colors (in a mathematical model, that is). In practice, this is not possible due to the physicochemical properties of dyes.

In printing, when three primary colors are mixed, a dirty brown color is obtained, and to obtain black and its shades, additional paint (in English Key) is used - translucent black. Deep dense black is obtained by mixing all 4 colors.

Special black dyes are used in painting: black mars and soot and all the many shades of dark brown.

In projectors and monitors, black means no signal and therefore no light. (but this is additive synthesis - mixing of light rays different lengths waves, where the sum of all the colors of the spectrum gives white)

In printers this is done by mixing yellow magenta and cyan (or red green and blue)

You need to mix all the colors

in painting - red, yellow and blue.
In printing (for printing presses) - cyan, magenta and yellow. But then it turns out unsaturated black, grayish. A certain percentage of black color is usually added to it. Hence the CMYK palette

To get black color, you need soot. But mixing all colors, or individual ones, will not achieve the black effect.

Soot is amorphous carbon, a product of incomplete combustion or thermal decomposition of hydrocarbons under uncontrolled conditions. It is used in large quantities to prepare black paint in the printing and paint industries.

What paints need to be mixed to get black?

Even a beginner knows that all shades can be made with just three basic colors - blue, red and yellow. You just need to know the rules for combining paints and the required proportions. But in practice, everything may turn out to be more complicated, and instead of the required color, a grayish, achromatic tone is obtained. It is also difficult to find the right way to get black by mixing paints. The finished paints will be similar to it, but not 100%.

Features of black color

Natural black (charcoal) is, in fact, the absence of color - that's what scientists say. This achromatic tone is the complete opposite of white. If the latter reflects an overwhelming amount of light rays, then black, on the contrary, tends to absorb them. There is no absolutely black color in the world, but the darkest vantablack carbon is very close to the “ideal” - it absorbs 99.965% of the rays of the sun, microwaves, and radio waves. That is, this material reflects the minimum possible amount of light, and therefore is considered the blackest on Earth.

Black dye is made from various carbons; it is these substances that make it possible to obtain all types of paints the right tone. The most commonly used materials are carbon black and graphite. Formerly artists they got matte black from burnt bone, and there was no darker tone. Today, production from minerals has been put on stream, so in any art store you can buy paint, pencil, plasticine or a dark-colored felt-tip pen.

Color models and color synthesis

Scientists have “derived” two main color models that allow you to create all kinds of tones and shades. Color synthesis involves the use of one of the models:

RGB, or additive. It involves the superposition of light rays on top of each other in a certain order, with a set intensity. The main range of colors fits into the standard (basic) ones - red, blue and yellow. Additive synthesis is used in monitors, but it will not be possible to make black in the same way as the others. Black, according to RGB, is the absence of reflection.
CMYK, or subtractive. All tones are obtained by mixing paints physically. Black is created by adding all other tones, and white in this system is the absence of color. This model is used in printing, its main colors are cyan (blue), yellow, magenta (magenta).

Subtractive mixing method

This method of adding colors involves creating fewer tones than is possible using RGB. In theory, this model involves obtaining black color by mixing a number of other colors. But when the pigments are actually mixed, what comes out is not a black tone, but a dark brown one, with a brown tint, which will be very noticeable when diluted.

Therefore, in a printing house where the subtractive method is used, a key tone is added to this mixture - real black in finished form. No ink obtained by mixing colors can replace true black pigment, as printers have long known.

Combining paints to produce charcoal

If you read manuals for beginning artists, you can find instructions everywhere: no combination of paints will give a 100% black tone. But there are tables with information about what paints need to be mixed to create the darkest possible shade, close to black.

The simplest way involves connecting red, blue and yellow paint. Gouache and oil are best suited, but watercolor will be too transparent and will not provide the necessary depth. Any basic set of paints will do, although artists often use cyan, magenta, cadmium yellow, royal blue and alizarin red.

place a drop of each paint on a white palette (take an equal amount of all colors) at a short distance from each other;
gently mix the colors with a brush or spatula;
Mix the materials for at least 15 seconds so that there are no veins, using circular movements.

If you need to lighten the black a little, add a drop of white paint into it. To give the tone of a natural sky, add a drop of blue or violet pigment. To draw a night forest, add a little green to black, and to draw the rays of the sun on a dark surface, add a little orange. Of course, the expressiveness of such blackness will be less; for a rich tone it is better to buy a ready-made color in the store.

There are other methods for obtaining the desired color:

red + green;
purple + brown;
blue + orange;
purple + yellow;
blue + brown.

All the resulting tones will be close to black, but not ideal; upon closer inspection, it is easy to identify a “fake”. In the first option, it is better to take red alizarin and emerald. But the finished color can still have a shade of one of them or become olive, purple, or brown.

According to artists, the best color is obtained by mixing blue and brown paint regardless of its brand and specific type. Moreover, the more brown, the “warmer” the blackness will be. On the contrary, blue greatly “cools” the finished color. Diluting this color with water gives an excellent gray tone.

Shades of black

Professionals highlight a lot of shades of the darkest dye. Not so long ago, artists designated the following tones:

slate (with an admixture of gray);
anthracite (with shine);
ox blood (mixed with red).

Nowadays, colorists and artists create completely different colors; their range has expanded significantly. With the introduction of different colors, the charcoal will not be so dark, but brownish, bluish or with a hint of purple. Many shades are obtained by adding white. Here are some interesting dark tone variations:

soft coal - to create it, mix turquoise, pink, yellow, add a drop of ready-made black;
medium coal - combines ultramarine, reddish, light yellow, adds a little black;
black and blue - combine brown and blue, and the second color should be 2 times larger.

Mixing paints is easy, and experimenting is always fun. In practice, you can select the necessary proportions to create the required color scheme for a drawing - even a schoolchild can do this.

Mixing colors is one of the most difficult procedures that a person who decides to make repairs on their own may face the need to perform. The point is that it is very important to know what colors to mix to create a certain tone. It should be immediately noted that it is better to purchase white paint and tint it in the store using a special machine, so the tone will be uniform. If you decide to do everything yourself, then you can read more about how to mix colors correctly.

These materials are universal, they are used for many purposes: with their help you can simply paint walls, paint stained glass windows, apply designs on the wall and ceiling. In general, the scope of their use is limited by imagination. The compositions are easy to use and adhere well to the surface. But if you decide to paint a multi-component image on the wall, then buying paint of all the necessary colors will be too expensive, and after completion of the work there will be large number unnecessary material. In this case, it is better to buy a basic series, and to create certain shades, mix acrylic paints.

Mixing base paint colors makes it possible to get many different shades, while you can save a lot on your purchase

Main color range

Everyone knows from school: when you combine yellow and red, you get orange, but if you add blue to the same yellow, you get green. It is on this principle that the table for mixing acrylic paints is built. According to it, it is enough to purchase only the primary colors:

white;
black;
red;
brown;
blue;
yellow;
pink.

You can just mix acrylic paints these tones to obtain the majority of existing shades.

Basics of mixing according to the table

To properly mix materials, you cannot do without a table. At first glance, it is easy to work with: to get the desired result, you just need to find the color and see what components are required. But the color mixing table does not indicate the proportions, so it is necessary to gradually add tinting material to the main paint and apply the mixture to some unnecessary product: a sheet of plywood, drywall, and so on. Then you need to wait until the material dries. If the color matches what is required, you can begin work on the main surface.

Coloring technique

Now about how to get colors. By mixing acrylic materials, you can achieve the formation of two main tones: light and dark. Basic tones: earthy, green, orange, purple. To create color, it is recommended to follow certain rules:

Light. In this case, the main material is titanium white, to which one or two tinting compounds are added. The less additional paintwork materials are used, the lighter the tone will be. This is how you can make most shades of a light palette.
Dark. To create shades of this type, do the opposite. Before mixing colors, you need to prepare a base tone; black dye is gradually introduced into the base. When working with black paint, you need to be careful because it can make the color look muddy rather than dark.
Green. This shade is not in the main palette, so you will need to mix yellow and blue. The exact ratio can only be determined experimentally.
Violet. This cool color, which is obtained by mixing blue with pink or red. In some cases, you will also need to add black to darken the material.
Orange. To create this color you need to mix red and yellow. For a richer orange, it is recommended to add more red and vice versa. If you want to create a soft color, for example, coral, then you need to lighten the material with white. Can I add dark dyes? Yes, you can, but mixing colors may result in a muddy tone.
Earthy. Here the main color is brown. Adding to it various shades, get a color from beige to dark wood.

Rules for working with the palette

To get started, you will need a basic set of paints, brushes, a container of water and a palette (you can take any surface, including school supplies for drawing).

It is recommended to place white in the center, since it is used in creating most shades. Dyes of the main color range are placed in the recesses around (if any). You need to mix carefully, gradually adding tinting material and constantly checking the result. After mixing the colors, the brush should be rinsed in a container of water.

Note! Working with materials based on acrylic resins using a table and palette is quite simple. The main thing is to practice more, the result will get better each time.

Oil paints

If you compare this material with watercolor or acrylic, then oil is more fluid. Because of this, you need to mix the compositions very carefully. different colors. On the one hand, this is a drawback, but on the other hand, this feature allows you to obtain the following effects:

Providing thorough mixing, a uniform tone will be obtained. This material is perfect for both complete painting of surfaces and partial decoration.
If you mix partially, then different colored veins will appear on the coating.

Mixing

Now about how to mix oil paints. For mixing paint colors on oil based a table is also used. It indicates the colors obtained by combining various tinting components. In addition, here you can find such an indicator as a combination of shine. If you add a little gloss to a matte base, there will be practically no result, but if you do the opposite, the shine will be slightly muted.

Mixing methods:

Mechanical. In this case we're talking about about mixing two or more different-colored materials in one container. Color saturation is controlled by the number of compounds bright colors. Desired color is created even before the wall or ceiling is processed.
Color overlay. Gradual application of several strokes on top of each other.
Optic. This is the most complex method, which is available only to specialists. It involves mixing glossy and matte bases while applying paint to the surface. You can mix paint colors only on the surface being treated, otherwise you will get a more even tone.

Peculiarities

The first method fully corresponds to the data in the table. When it comes to color application, the result is unpredictable. One of the simplest options optical illusions is glazing: applied to the surface dark tone, after it dries, paint a little lighter, and then very light. As a result, each color will be visible through the top layers.

So there is no specific pattern. To find out which colors need to be mixed, it is not enough just to take and look at the table; it is important to constantly practice and not be afraid of experiments. This way you can create a new effect that will make the interior unique. It is also important to remember that a mixed shade is very difficult to replicate, so you should remember the proportions.

Now the question of how to mix paints correctly does not seem so difficult.

What colors need to be mixed to get black. How to get colors: black, blue, red

What colors should I mix?

Color models

What colors should I mix?