What colors to make black from? How to get black from paints

Black and white are considered the actual absence of color. Therefore, to the question of how to get black, you can answer that it is only possible to get a color close to it by mixing several.

For an artist, this color means the darkest, and for scientists, it means the absence of color. Black is an achromatic shade that absorbs all light. In terms of absorption of light flux, it is opposite to white, which completely reflects the light and radiation incident on it. In the natural environment, there is a material close to it in tone - this is dark Vantablack carbon, which absorbs 99.96% of incident light and other radiation.

Even during the Renaissance, masters of painting tried to obtain black paint and concluded that it was impossible to do this from other paints. Therefore, they used burnt bones, from the soot of which they made a matte black paint.

Today, black paint is made industrially from natural carbon pigments such as graphite and carbon black.

In practice, 2 main color models are used:

RGB- additive, which is based on the superposition of rays reflected from the surfaces of objects. It is used in computer monitors and contains the main colors: R-red, G-green, B-blue. The remaining colors and shades are obtained by overlay.
CMYK- subtractive model, which is based on the physical mixing of pigments, with white being the absence of color, and pure black obtained by mixing cyan (C-cyan), magenta (M-magenta) and yellow (Yellow) tones, K (key color) - key. This system is used in the printing industry and printing on printers.

What colors should I mix?

To get a black color close to ideal, you can go by mixing paints of the following colors:

Red and green– the resulting tone will be close to the desired one (in fact, it turns out to be very dark, and if you look closely, it’s not quite ideal).
Blue, yellow and red– if you take these 3 primary colors, then mixing them will also allow you to get a fairly rich color.
D additional colors (brown, purple, blue)– you need to mix them in small quantities, then you will get an approximate color.

You can use any paints intended for painting or household purposes for mixing: acrylic, gouache, watercolor and oil. If there is no ready-made dye of a classic tone, then there are a lot of options on how to make black paint from others.

To obtain a pure color, you will have to work hard and select the necessary proportions, gradually adding different colors.

On the video: what colors to mix to get black.

There are many shades, slightly different from classic black, that will allow the artist to add originality to his work. Historically, the following shades have developed:

Slate - Essentially a dark grey, the name comes from the slate slate that was previously used in blackboards.
Karamazy – synonyms for “dark-haired”, “dark-skinned”.
Anthracite is a highly saturated color with some shine.
Ox's blood is a black and red color.
Bardadym is the name of the king of black suit in the game of cards.

Modern shades of black differ from those used previously:

Soft black - to obtain it you need to mix the following colors: turquoise, pink and yellow, sometimes add a little more white.
Medium - pink, ultramarine and light yellow paints are mixed for it.
Rich color It is possible to make not only from three primary colors (chromatic), but also using red, yellow and blue.
Blue-black - obtained by mixing brown and dark blue.

Many shades of dark and light gray can be made by experimenting with adding white paint or adding a little water at a time. Experience will show you what colors and shades you get.

Black and white are considered the actual absence of color. Therefore, to the question of how to get black, you can answer that it is only possible to get a color close to it by mixing several.

Today, black paint is made industrially from natural carbon pigments such as graphite and carbon black.

Color models

In practice, 2 main color models are used:

RGB- additive, which is based on the superposition of rays reflected from the surfaces of objects. It is used in computer monitors and contains the main colors: R-red, G-green, B-blue. The remaining colors and shades are obtained by overlay.
CMYK- subtractive model, which is based on the physical mixing of pigments, with white being the absence of color, and pure black obtained by mixing cyan (C-cyan), magenta (M-magenta) and yellow (Yellow) tones, K (key color) - key. This system is used in the printing industry and printing on printers.

What colors should I mix?

To get a black color close to ideal, you can go by mixing paints of the following colors:

Red and green - the resulting tone will be close to the desired one (in fact, it turns out to be very dark, and if you look closely, it is not quite ideal).
Blue, yellow and red - if you take these 3 primary colors, then mixing them will also allow you to get a fairly rich color scheme.
Additional colors (brown, purple, blue) - you need to mix them in small quantities, then you will get an approximate color.

To obtain a pure color, you will have to work hard and select the necessary proportions, gradually adding different colors.

On the video: what colors to mix to get black.

Shades of black

There are many shades, slightly different from classic black, that will allow the artist to add originality to his work. Historically, the following shades have developed:

Slate - Essentially a dark grey, the name comes from the slate slate that was previously used in blackboards.
Karamazy – synonyms for “dark-haired”, “dark-skinned”.
Anthracite is a highly saturated color with some shine.
Ox's blood is a black and red color.
Bardadym is the name of the king of black suit in the game of cards.

Modern shades of black differ from those used previously:

Soft black - to obtain it you need to mix the following colors: turquoise, pink and yellow, sometimes adding a little white.
Medium - pink, ultramarine and light yellow paints are mixed for it.
A rich color scheme can be made not only from three primary colors (chromatic), but also using red, yellow and blue.
Blue-black - obtained by mixing brown and dark blue.

Many shades of dark and light gray can be made by experimenting with adding white paint or adding a little water at a time. Experience will show you what colors and shades you get.

Mixing primary colors (1 video)

What colors should you mix to get black?

Black and white colors are also commonly called the absence of color as such. If you need to get black by mixing other colors, then this can be done by mixing three colors - magenta, yellow and cyan.

You can get black by mixing red and green A. However, in this case the color will not be 100% black.

If you need to get black from other paint colors, then you will need only three colors for this, namely:

There are also two more paints that, when mixed, will produce black: red and green. The only thing is that the color is not quite black, but very close to it.

If there are no paints with black color, and you need it right now, then black color can be obtained by mixing paints of other colors. In order to get black you need to mix colors such as blue, red and yellow. From these three popular paint colors we get the desired black color.

In order to get black color, one color, we need to have as many as three others in stock: these are cyan, yellow and magenta.

If you mix only blue and yellow, you get green
yellow + magenta gives us red
magenta and cyan mix and get blue
oh well we get black color, if you mix all these three colors.

If you mix red, blue and green in equal proportions, you will get a pure black color, but it will not be saturated.

If you need black color in paints for painting, then you can make it yourself. To do this, take activated carbon (in tablets) and dissolve it in vodka.

This is how you can get black paint for drawing.

If you are faced with the need to obtain black color by mixing various shades paints, then to get black you will need to mix three colors, the harm of which:

1) Purple color;

3) And blue color.

And here's the mix:

To get black, you can mix all the colors that are available except white, white will turn black into gray. You can also mix red and green, or you can also mix yellow, magenta and cyan.

Using additive color mixing (RGB model), black can only be obtained with zero intensity of all three components. This mixing of colors is a matter of taste. Using subtractive color mixing (CMYK model), black color, theoretically, is obtained by mixing the C, M, Y components with maximum intensities. What you get in practice is very different from black, so in practice blacK is added to the colors Cyan, Magenta and Yellow - a rich black color.

what colors can be mixed. to get black?

Comments

if you don’t need it right now, you can buy black dye))

Blue, red and green in equal proportions - you get pure black color)))

There are 4 primary colors: yellow, red, blue and black. White separately. When they are mixed, additional colors (green, orange, purple, brown, etc.) and their shades are obtained. Therefore, you cannot get black color, no matter what paints you mix.

what nonsense. Blue, red and green in equal proportions. That's pure black.

Activated carbon + dilute with vodka. Take a look at the court http://forum.say7.info/topic48484.html

Raida, thank you very much. you saved me.

In the future, buy black paint without any problems.

Girls, I’ve already scoured the entire Internet, I can’t find the best way to mix several colors of soap base, so that I get multi-colored stains, how can I do this so that the base doesn’t have time to harden? Thank you all in advance for your answers.

Moms and not only, tell me how to get black, I need to make a layer of black, what to add or what to mix. Thank you

To my post. girls thank you very much. For the answers. There are a few but! My son practically doesn’t eat complementary foods, just porridge. Vegetables are refused to be cut. I even try to give an apple for several days and my nose turns up. In short, today I offered a mixture. First, porridge.

Girls, I need help. I always knew very well that the color on the walls was different from the color on the palette, but only so much. At my daughter’s request, of course, I chose light pink paint, but in fact it turned out not light pink at all (((it was.

Everyone Good morning. Dear professionals, do not pass by. Help with advice. We ordered a cake with cream decoration. What cream will turn into an intense black color (I have americolor and chefmaster gels) and will hold its shape well? Everyone in advance.

Girls, help, I have a little idea. You need to buy a lot of bodysuits in regular black and white colors, without patterns, you need a lot, so the price is up to 500 rubles, but they must be of high quality. Please help me where to find black ones? Possibly online, but preferably Russia.

Dear girls, tell me how to get such a rich golden color of mastic? I paint with condurin on top - it doesn’t turn out that way at all ((Thanks to everyone in advance!

Sh I'm looking for a jacket like this, only in black. I will be glad to receive any offers with prices) Thank you all in advance!

Smart little fellows :) please tell me how to get a purple color, such as a satin ribbon (see photo). I need to paint the mastic, I plan to do the painting with an airbrush. Americolor royal violet dye gives blue when dyed, what is the reason why it is not purple.

What colors must be mixed to get black?

red+blue+green=black
easy gray and brown, mix for a long time until black or just mix dark colors for a very long time and you will get black

when mixing yellow, magenta and cyan dyes

5 proportions of red, 1-3 blue will be a little blue or a little red, then add a little yellow 0.5-1.

I had a case when I ran out of black paint in the watercolor “Leningrad”, so I finally learned how to get black by mixing two colors (I don’t remember the exact names): this is purple, and it seems dark green.

If we talk about mixing colors.
By mixing paints of the three primary colors of blue (cyan), yellow and purple (magenta) or any color of the first order with it additional color second order (spectral yellow + spectral violet for example). But this can only be done in the theory of subtractive synthesis with ideal colors (in a mathematical model, that is). In practice, this is not possible due to the physicochemical properties of dyes.

In printing, when mixing three primary colors, it turns out dirty brown and to obtain black color and its shades, they use additional paint (in English Key) - translucent black. Deep dense black is obtained by mixing all 4 colors.

Special black dyes are used in painting: black mars and soot and all the many shades of dark brown.

In projectors and monitors, black means no signal and therefore no light. (but this is additive synthesis - mixing of light rays different lengths waves, where the sum of all the colors of the spectrum gives white)

In printers this is done by mixing yellow magenta and cyan (or red green and blue)

You need to mix all the colors

in painting - red, yellow and blue.
In printing (for printing presses) - cyan, magenta and yellow. But then it turns out unsaturated black, grayish. A certain percentage of black color is usually added to it. Hence the CMYK palette

To get black color, you need soot. But mixing all colors, or individual ones, will not achieve the black effect.

Soot is amorphous carbon, a product of incomplete combustion or thermal decomposition of hydrocarbons under uncontrolled conditions. It is used in large quantities to prepare black paint in the printing and paint industries.

What paints need to be mixed to get black?

Even a beginner knows that all shades can be made with just three basic colors - blue, red and yellow. You just need to know the rules for combining paints and the required proportions. But in practice, everything may turn out to be more complicated, and instead of the required color, a grayish, achromatic tone is obtained. It is also difficult to find the right way to get black by mixing paints. The finished paints will be similar to it, but not 100%.

Features of black color

Natural black (charcoal) is, in fact, the absence of color - that's what scientists say. This achromatic tone is the complete opposite of white. If the latter reflects an overwhelming amount of light rays, then black, on the contrary, tends to absorb them. There is no absolutely black color in the world, but the darkest vantablack carbon is very close to the “ideal” - it absorbs 99.965% of the rays of the sun, microwaves, and radio waves. That is, this material reflects the minimum possible amount of light, and therefore is considered the blackest on Earth.

Black dye is made from various carbons; it is these substances that make it possible to obtain all types of paints the right tone. The most commonly used materials are carbon black and graphite. Formerly artists they got matte black from burnt bone, and there was no darker tone. Today, production from minerals has been put on stream, so in any art store you can buy paint, pencil, plasticine or a dark-colored felt-tip pen.

Color models and color synthesis

Scientists have “derived” two main color models that allow you to create all kinds of tones and shades. Color synthesis involves the use of one of the models:

RGB, or additive. It involves the superposition of light rays on top of each other in a certain order, with a set intensity. The main range of colors fits into the standard (basic) ones - red, blue and yellow. Additive synthesis is used in monitors, but it will not be possible to make black in the same way as the others. Black, according to RGB, is the absence of reflection.
CMYK, or subtractive. All tones are obtained by mixing paints physically. Black is created by adding all other tones, and white in this system is the absence of color. This model is used in printing, its main colors are cyan (blue), yellow, magenta (magenta).

Subtractive mixing method

This method of adding colors involves creating fewer tones than is possible using RGB. In theory, this model involves obtaining black color by mixing a number of other colors. But when the pigments are actually mixed, what comes out is not a black tone, but a dark brown one, with a brown tint, which will be very noticeable when diluted.

Therefore, in a printing house where the subtractive method is used, a key tone is added to this mixture - real black in finished form. No ink obtained by mixing colors can replace true black pigment, as printers have long known.

Combining paints to produce charcoal

If you read manuals for beginning artists, you can find instructions everywhere: no combination of paints will give a 100% black tone. But there are tables with information about what paints need to be mixed to create the maximum dark shade, close to black.

The easiest way involves combining red, blue and yellow paints. Gouache and oil are best suited, but watercolor will be too transparent and will not provide the necessary depth. Any basic set of paints will do, although artists often use cyan, magenta, cadmium yellow, royal blue and alizarin red.

place a drop of each paint on a white palette (take an equal amount of all colors) at a short distance from each other;
gently mix the colors with a brush or spatula;
Mix the materials for at least 15 seconds so that there are no veins, using circular movements.

If you need to lighten the black a little, add a drop of white paint into it. To give the tone of a natural sky, add a drop of blue or violet pigment. To draw a night forest, add a little green to black, and to draw the rays of the sun on a dark surface, add a little orange. Of course, the expressiveness of such blackness will be less; for a rich tone it is better to buy a ready-made color in the store.

There are other methods for obtaining the desired color:

red + green;
purple + brown;
blue + orange;
purple + yellow;
blue + brown.

All the resulting tones will be close to black, but not ideal; upon closer inspection, it is easy to identify a “fake”. In the first option, it is better to take red alizarin and emerald. But the finished color can still have a shade of one of them or become olive, purple, or brown.

According to artists, the best color is obtained by mixing blue and brown paint regardless of its brand and specific type. Moreover, the more brown, the “warmer” the blackness will be. On the contrary, blue greatly “cools” the finished color. Diluting this color with water gives an excellent gray tone.

Shades of black

Professionals highlight a lot of shades of the darkest dye. Not so long ago, artists designated the following tones:

slate (with an admixture of gray);
anthracite (with shine);
ox blood (mixed with red).

Nowadays, colorists and artists create completely different colors; their range has expanded significantly. With the introduction of different colors, the charcoal will not be so dark, but brownish, bluish or with a hint of purple. Many shades are obtained by adding white. Here are some interesting dark tone variations:

soft coal - to create it, mix turquoise, pink, yellow, add a drop of ready-made black;
medium coal - combines ultramarine, reddish, light yellow, adds a little black;
black and blue - combine brown and blue, and the second color should be 2 times larger.

Mixing paints is easy, and experimenting is always fun. In practice, you can select the necessary proportions to create the required color scheme for a drawing - even a schoolchild can do this.

Features of black color

Black dye is made from various carbons; it is these substances that make it possible to obtain all types of paints of the desired tone. The most commonly used materials are carbon black and graphite. Previously, artists obtained matte black from burnt bone, and there was no darker tone. Today, production from minerals has been put on stream, so in any art store you can buy paint, pencil, plasticine or a dark-colored felt-tip pen.

Color models and color synthesis

Scientists have “derived” two main color models that allow you to create all kinds of tones and shades. Color synthesis involves the use of one of the models:

RGB, or additive. It involves the superposition of light rays on top of each other in a certain order, with a set intensity. The main range of colors fits into the standard (basic) ones - red, blue and yellow. Additive synthesis is used in monitors, but it will not be possible to make black in the same way as the others. Black, according to RGB, is the absence of reflection.
CMYK, or subtractive. All tones are obtained by mixing paints physically. Black is created by adding all other tones, and white in this system is the absence of color. This model is used in printing, its main colors are cyan (blue), yellow, magenta (magenta).

Subtractive mixing method

Combining paints to produce charcoal

The easiest way involves combining red, blue and yellow paints. Gouache and oil are best suited, but watercolor will be too transparent and will not provide the necessary depth. Any basic set of paints will do, although artists often use cyan, magenta, cadmium yellow, royal blue and alizarin red.

The instructions are:

place a drop of each paint on a white palette (take an equal amount of all colors) at a short distance from each other;
gently mix the colors with a brush or spatula;
Mix the materials for at least 15 seconds so that there are no veins, using circular movements.

There are other methods for obtaining the desired color:

red + green;
purple + brown;
blue + orange;
purple + yellow;
blue + brown.

All the resulting tones will be close to black, but not ideal; upon closer inspection, it is easy to identify a “fake”. In the first option, it is better to take red alizarin and emerald. But the finished color can still have a shade of one of them or become olive, purple, or brown.

According to artists, the best color is obtained by mixing blue and brown paint, regardless of its brand and specific type. Moreover, the more brown, the “warmer” the blackness will be. On the contrary, blue greatly “cools” the finished color. Diluting this color with water gives an excellent gray tone.

Shades of black

Professionals highlight a lot of shades of the darkest dye. Not so long ago, artists designated the following tones:

slate (with an admixture of gray);
anthracite (with shine);
ox blood (mixed with red).

soft coal - to create it, mix turquoise, pink, yellow, add a drop of ready-made black;
medium coal - combines ultramarine, reddish, light yellow, adds a little black;
black and blue - combine brown and blue, and the second color should be 2 times larger.

Mixing paints is easy, and experimenting is always fun. In practice, you can select the necessary proportions to create the required color scheme for a drawing - even a schoolchild can do this.

In this article we will look at what needs to be mixed to get brown color in paints.

Such a noble and calm color as brown has always dominated the clothing of rich and noble representatives. By the way, its main characteristic is stability and stability. But often the palette does not have this color or its required shade. And young or even experienced artists should be able to select the right colors in order to independently create a color scheme of the brown spectrum. And our recommendations will help in this aspect.

How to get brown color when mixing: 3 ways

Before rushing to the color scheme and brushes, you need to remember what colors there are. They are divided into two groups – basic and additional. There are also two more subgroups - composite and complex. All of them make up the design of four groups of basic colors.

Remember - primary colors cannot be obtained by combining any palettes. By the way, they are the ones that become the basis for creating other colors. Moreover, having black and white on hand, you can extract absolutely any color.

IMPORTANT: Brown belongs to the group of complex colors.

We offer three basic methods for obtaining brown color.

Green (blue+yellow) with red

Even schoolchildren know that brown comes out when you mix two colors together - green and red. This is the case if we talk about the primary and composite colors.
But the challenge is still to create a green tint. It couldn't be easier! Take two primary colors - yellow and blue.
You need to take an equal number of different shades. But take into account your wishes.
- If you want to end up with a darker color, then add a little more blue, but to the finished green color.
- If, on the contrary, you want to make a more transparent shade, then initially take a little more yellow.
After receiving the secondary color, we begin making the tertiary color. To the green color you got, you need to add a little red tone.
It is important to introduce red paint, and not vice versa! After all, it is the fundamental tone that regulates the degree of darkness and saturation brown tint. If you add too much red coloring, then you will get more of a brick tone.
- But also keep in mind that the red color makes brown so warm (in large quantities it can even create a rust effect), but green, on the contrary, will make it even a little grayish and cold.

Orange (yellow+red) with blue

The first thing you need to do is take red. And add yellow to it. By the way, it needs to be introduced gradually and in small quantities.
On average, yellow should be only 10% of the volume of red. It's important to get a dark orange. But keep in mind that too much red coloring will create a reddish brown color.
Blue paint will need even less - 5-7% of the total volume. You also need to add gradually, in small portions and stirring the ingredients well.
Of course, adjust the tone and saturation of the brown color using the blue tint.

Violet (red+blue) with yellow

Red and blue colors should be taken in equal quantities. Then you can get a noble and even royal shade purple, which will have the desired richness and warmth.
Then, you need to introduce yellow color little by little. It will lighten the resulting purple, so keep an eye on the amount. If the color is predominantly yellow, then the brown color will be lighter and warmer. The violet tone does the opposite.

IMPORTANT: Too much yellow paint will create an ocher shade.

How to make a light brown color from paints, gouache when mixed?

To get a light brown color, you need to give the yellow color a predominance. But! Let's repeat that it's too much large number will make the color look like ocher. And, of course, it all depends on the desired lordship.

To whiten brown color, you need add white. Yes, it's that simple. The more you add, the lighter the final color will be.
But don’t overdo it, brown is a warm color and white will neutralize this characteristic. Therefore, introduce very carefully, gradually and in small portions (literally, 1% of the total mass of paints).
Although adding the previous color will help correct the situation.

How to get a dark brown color when mixing paints and gouache?

If we talk about previous mixing options, more blue or green will make a darker brown. But they will also add their own nuance. There is another, simpler and faster way to get a dark brown color.

Just add black paint. But you need to work with it extremely carefully, since a small dose of excess paint will simply turn it into a black range.
Therefore, add paint in tiny portions and take note of one rule - conduct experiments with a small amount of paint.

By the way, so as not to make a mistake with in the right color, mix a little black with white. But leave the dominance of the first shade. Just make it a little softer as it can quickly eat up the brown color.

How to get chocolate when mixing paints or gouache?

To create chocolate color, you need to tinker a little. The most unencumbered scheme is to choose the right tones of orange and blue. But there is another possible option.

Combine yellow and blue paint to get a dark green color. In another bowl, combine red and a drop of yellow to create orange.
Now combine the two resulting colors. And in the end you get the color of green grass or grass green.
Now you need to create a bloody red color. To do this, combine the same orange and red palette.

In conclusion, it remains to combine the two complex colors obtained.
And as a result we get the color of real chocolate.
- If you want milk chocolate then add a drop of white paint
- A mixture of white and yellow will give an additional golden tint to the color.
- Dark chocolate is again obtained by adding black paint.
- But yellow with chocolate will help you get a beautiful and even brown color

How to get coffee color when mixing paints or gouache?

Coffee color can be obtained by adding the same black gouache. Also, you need to mix according to technology - orange paint plus blue color. In this case, you can achieve the desired tone.

Getting coffee color

Alternatively, you can achieve the desired color using a composition of purple and orange paint. If necessary, you need to add a drop of black tint.

Color mixing: table

For a clearer understanding, we would like to provide you with a table that will show all possible versions removal of brown color and its range. To get a brown color, you need to mix the component colors, adding the main shade to them. True, there are other options where the composition includes not just secondary colors, but even complex palettes.

Black is an achromatic shade that completely absorbs all colors. In other words, black color indicates the absence of luminous flux as such. Black color is the opposite of white color, which reflects the radiation falling on it. Black color, on the contrary, absorbs it. There is no absolute black color in the world. However, material has already been found that is as close as possible to it. It's called Vantablack. As of 2014, this particular substance was named the blackest on the planet. It absorbs 99.965% of the radiation incident on it, which means not only light itself, but also radio waves and microwaves. Now we’ll talk about how to get the most black color possible and what you need for this.

What colors to mix to get black?

There are several ways to obtain black. The first one is mixing green and red. As already mentioned, it is almost impossible to achieve a completely black color, but using this method you can get a color that is as close to a black shade as possible. If you want to get a more saturated black color, then you can try the following method - using a subtractive circuit. To do this, tediously mix purple, cyan and yellow. These colors are called primary. Blue and purple colors have another name - cyan, magenta. You can mix oil, watercolor or acrylic paints.

How to get a shade of black

In addition to the classic black color, there are also its shades, with which you can add originality to your work. In order to consider this issue, let's plunge into history and look at what shades of black existed before and which of them are common in our time. Previously, the following shades of black existed:

Slate shade. It is black and gray in color.
Anthracite black shade. This is a very rich black color with shine.
Karamazy shade.
Klushi.
A shade of oxblood. It is a black color mixed with red.
Bardadym.

Currently, other shades of black are used. With different proportions of paint used, black may turn out to be bluish, brown and other shades. Moreover, by adding white to the already obtained paint, you can achieve one or another shade of black. Let's look at several shades of black, and also tell you how you can get them.

Soft shade of black. To get this shade you need to mix turquoise, pink and yellow. You can also add a little white to the already obtained black paint.
Medium black shade. This color will have much more black tint than a soft shade of black. To obtain it, you need to mix pink, ultramarine and light yellow.
Rich black color. This color of black can be obtained not only by mixing the three primary chromatic colors. To obtain it, you can mix red, yellow and blue paint.
Blue-black shade. It can be obtained by mixing brown and dark blue paint.

If, when you receive a particular shade, the color does not suit you, then you can add red, yellow or blue paint to it.

To achieve a black paint color, you will have to work hard when mixing colors, since you need to add paints in certain proportions. However, in the future it will be much easier to do this, since you will already have a lot of experience in mixing colors.

What colors to make black from? How to get black from paints

What colors should I mix?

Color models

What colors should I mix?